A PRACTICAL EVERYDAY ARROW SYSTEM WORKSHEET
Everyday Arrow Build Cheatsheet and Worksheet
Plan your arrow weight, length, spine, components, FOC, and projected performance before you start buying and assembling parts.
The free worksheet follows the same build order used throughout the Everyday Arrow System and gives you one place to record your decisions and calculator results.
Get the Free Arrow Build Worksheet
Enter your email and I will send the complete worksheet directly to you.
You will also receive practical arrow-building and bowhunting guidance from The Everyday Bow Hunter. Unsubscribe at any time.
Build the Arrow on Paper Before You Build It at the Workbench
An arrow is a system. Shaft length and GPI affect weight. Length and point weight affect dynamic spine. Inserts, broadheads, fletchings, and nocks change total weight and balance. If you make each choice separately, it is easy to build yourself into a corner.
This worksheet gives you a practical order: set the target, choose the shaft, plan the components, check spine and FOC, estimate performance, then build and test.
What the Arrow Build Worksheet Helps You Plan
1. Your Bow and Hunting Goal
Record draw weight, draw length, bow speed, expected distance, and the performance goal the arrow needs to support.
2. Target Arrow Weight
Use the Everyday Arrow Weight Formula to establish a practical target and working range before selecting components.
3. Shaft and Arrow Length
Compare shaft spine, GPI, cut length, safety clearance, and the weight the shaft contributes to the finished build.
4. Components and FOC
Plan inserts, broadheads, nocks, wraps, and fletchings while watching total weight and your 13–18% Everyday Bow Hunter FOC target.
5. Spine and Performance Checks
Record projected dynamic spine, speed, kinetic energy, and momentum so one change does not create a new problem elsewhere.
6. Final Build and Testing
Confirm actual finished weight, measured FOC, tuning, broadhead flight, and chronograph speed when one is available.
Use It With the Everyday Arrow System
The worksheet organizes your numbers. The Arrow System explains why each decision matters, and the calculators help you compare possible builds before you buy components.
Why I Use a Worksheet
I have built hundreds of arrows and tested a lot of combinations. The lesson is not that everyone needs my exact arrow. It is that every part needs to support the same finished goal.
Writing the build down makes tradeoffs visible. If a heavier insert pushes the arrow past your weight target, or a longer shaft weakens dynamic spine, you can adjust the plan before cutting, gluing, or buying another dozen shafts.
The worksheet will not replace manufacturer spine charts, tuning, or field testing. It helps you reach those steps with a better plan.
Get the Arrow Build Cheatsheet and Worksheet
Enter your email below and I will send the worksheet to your inbox.
Arrow Build Worksheet Questions
Is this an arrow spine chart?
No. Use the worksheet with the shaft manufacturer’s current spine chart and the Everyday Bow Hunter Dynamic Spine Calculator. The worksheet keeps your inputs, candidate spine, and final decision together.
Can I use it before buying arrow components?
Yes. That is one of its main purposes. Use projected component weights and calculator comparisons to test a build concept before you spend money or assemble the arrow.
Does it replace weighing and testing the finished arrow?
No. Projected values help you plan. Once the arrow is built, weigh it, measure its actual FOC, tune it, confirm broadhead flight, and use a chronograph when you want measured speed.
What should I use next?
Start with the Everyday Arrow System. Then follow the Arrow Build Guide and use the arrow calculators for each decision.